• Fits all Yamaha models prior to 2014, except the Wolverine 450WD & 2009-2010 Raptor 90.
• Does fit the Kawasaki Brute Force 750 4×4 and 2007-2012 Grizzly.
• Does fit the Yamaha Raptor 700 2012′ & older
• Includes new O-rings and a grease fitting
• Uses stock hardware
• Replaces OEM part #1UY-23812-00-00
• Does not fit power steering models
• Bolt hole to bolt hole width = 2.100
• Width on top = 1.68
• Click this below link to check your Yamaha machine OEM part #:
  • https://www.shopyamaha.com/parts-catalog/parts/sport-atv?ls=Sport-Atv&dealernumber=#
• Installation Instructions:
  • Shut off gas
  • Disconnect fuel line at fuel tank
  • remove body plastic over fuel tank
  • Remove fuel tank
  • Unbolt existing steering stem mount. KEEP ALL HARDWARE TO REUSE. 
  • Clean steering stem
  • Apply light film of grease to inside of new mounting blocks and o-rings. 
  • Re-install stock bolt sleeves, bolts, backing plate & lock tab
  • Tighten all bolts and bend over block tab 
  • Grease new steering stem mount with general purpose grease
  • Re-install the fuel tank, reconnect the fuel line and re-install plastic over the fuel tank..

SKU: 355 51000